Dries to recoat in 24 hours additional coat may increase these times. Sample color cans are also available for purchase if you would like to see how your home will look with any particular color.
cetol srd sikkens deck sico stain cedar colors wood re exterior natural translucent paint chart stains proluxe log gallon prolux Stir thoroughly before and periodically during application. The advanced alkyd resin with UV absorbers offers excellent durability and protection for siding and other vertical surfaces.Used in Cetol Door & Window Wood Finish is a high performance finish for specialty applications such as exterior trim and doors. Check out our Photo Gallery for fresh ideas and inspiration. Intermix different batches/cans together to ensure color consistency. Its penetrating alkyd-oil formulation enhances wood grain with rich color and signature clarity.
This color is not recommended for use on darker colored woods. Return & Cancellation Policy. Always sand in the direction of the wood grain and remove sanding dust. Sikkens Proluxe Cetol 1 RE is a premium, translucent, exterior wood base coat to be used with Sikkens Proluxe Cetol 23 RE Plus. Before starting, test your color choice on a small area, applying all coats required. Powered by BigCommerce. All this protection is possible because of the iron oxide pigments in Sikkens ProLuxe. Clean and prepare all wood surfaces as specified above. May also be used on its own as a three (3) coat system for specific purposes (i.e. Let dry three days before coating. However, the following preparation may be used as an alternate to sanding. Cetol 1 RE may also be used on its own as a three (3) coat system for specific purposes (i.e. Do not apply in direct sunlight, if rain, snow, heavy dew or low temperatures below 40 F (4 C) are expected within 48 hours. Color can vary with application, porosity and type of wood. 2.
sikkens cetol srd proluxe Bottle, Sikkens Proluxe Cetol SRD Transparent Stain, Allway 5 Gallon Helix Paint Mixer (10032), Sikkens Proluxe Cetol 1 RE Product Brochure, Sikkens Proluxe Cetol 1 RE Tech Data Sheet, Sikkens Proluxe Cetol 1 RE Safety Data Sheet (Spanish), Sikkens Proluxe Cetol 1 RE Safety Data Sheet (French), Cetol 1 RE CPSC Certificate of Compliance, Sikkens Proluxe Cetol Maintenance RE Clear Topcoat.
cetol siding log sikkens stain proluxe colors deck natural light finish srd homes saturated perfection prestige provides bucket rich performance 6. Color can vary with application, porosity and type of wood. Let the surface dry 3 days after power washing. Do not apply when moisture content of the wood is greater than 18%. Let the surface dry three (3) days after power washing. A penetrating transparent wood stain basecoat in a unique 3 coat system that provides excellent adhesion for premium protection and enhances the wood grain for signature clarity.
sikkens butternut stain gallon cetol exterior plus walmart Brushing is the preferred method of application, using a natural bristle brush, If applied by roller or airless sprayer, back brush immediately to ensure penetration and to avoid an uneven finish. Power wash cleaning solution from the wood with plenty of clean fresh water using 500 psi with the nozzle 8-12 inches from the surface for full effectiveness of the cleaning and to prevent damage to the wood. After removal of previous coatings, clean and prepare surface as specified above. Do not apply in direct sunlight, if rain, snow, heavy dew or low temperatures below 40 F (4 C) are expected within 48 hours. restrictions.
sikkens cetol proluxe twp 
To prevent damaging the wood, do not exceed 500 PSI. Skip to the beginning of the images gallery, Sikkens Proluxe Cetol 1 RE Exterior Stain. After treatment, allow surface to dry for three (3) days. A Better Way to StainIts about Transformation: old and weathered logs brought to life again, or timbers refreshed with color when they were once only gray PPG ProLuxe (Formerly Sikkens Cetol) 1 Primary Coat RE Gallon. Twin Creeks Log Home Supply is the leading provider of lumber, stains, sealants and other products for building, updating, and maintaining log homes.
Free Ground Shipping on 1 Gallon and 5 Gallon Pails
Recent PPG Proluxe Manufacturer's Rebate Forms:
Weathered gray wood, or wood affected with blue fungi or rust from nails may be treated, after cleaning withSasho CPRLog cleaner and Brightener.
cetol sikkens translucent woodstain 
For outdoor furniture and fences, apply a maintenance coat of Sikkens Proluxe Cetol 1 RE every one to two years. Sikkens Proluxe Cetol 1 RE Coverage Rate
2019 Name Update:
sikkens cetol proluxe Sikkens Proluxe Cetol 1 RE Application Dos and Donts. Let the solution sit on the wood for 15 20 minutes. Only the name is changing. 3. Sikkens Proluxe Cetol 1 RE Dry Time
Water repellant treated lumber requires one (1) year of weathering prior to application. Its powerful UV absorbers protect colour and wood substrate. Wipe the surface with acetone immediately prior to application. The side that gets the least sun You can use. The first coat of any Cetol system should be applied from the bottom up to avoid drips which may streak on the surface below. An annual inspection of all corners, butt joints, windows and doors is helpful in insulating and maintaining the life of your log home.
Brush in the direction of the wood grain starting at one end of the board or log and continuing to the other end of the board or log. 12. Apply when air and surface temperature is between 50 F (10 C) 90 F (32 C).
Sikkens Proluxe Cetol 1 RE Exterior Stain Colors:
Sikkens Proluxe Cetol 1 RE Maintenance Instructions
From custom milled beams to the most enduring wood protectants in the industry, Twin Creeks Log Home Supply can help you keep your log home in beautiful, long-lasting beauty. Avoid heavy abrasions immediately following application. UV Absorbers Added UV protection leads to less frequent maintenance. Coverage areas per coat for Sikkens Proluxe Cetol 1 RE as follows:
Use caution when walking on wet surfaces during application. Application Note: Tannin containing woods such as redwood, red cedar, mahogany, douglas fir, etc.
sikkens cetol colors stain chart log differently computers render note different please loghome The same great Sikkens formula you know and trust, slightly different labels. Whether you are in the middle of building your dream home, tackling a DiY project or just curious.
The high quality formula that is synonymous with the Sikkens name is exactly the same as before. Actual coverage may vary depending on the type, age and texture of the wood and application method. On previously coated wood, all old coatings must be completely removed before applying the first coat of any PPG Cetol system. After preparation, apply one even coat of Cetol 1 RE Wood Finish, avoiding heavy application. At ThePaintStore.com, we are pleased to offer all our products at competitive prices. Maintenance Procedure and Schedule: Proper maintenance starts with visual inspection. Along with the Sikkens Cetol 23 Plus RE, this series creates durable, lasting protection. Dries to touch in approximately 12 hours. Caulking Cracks, Checks, and Gaps :
Please note that colors render differently on different computers and may not precisely match the color of your delivered stain. Click here to learn more about our shipping. Areas that show minimal wear should only be lightly coated. Sikkens Proluxe Cetol 1 RE Color Visualization Tool
During application, saturate all end grains, nail holes, cavities, and cracks in the wood.
No problem. Premier Paint & Wallpaper. Let the solution dwell on the wood for 15-20 minutes as you scrub the surface with a hard bristle brush to help remove mill glaze or weathering. An annual cleaning of the structure with a house wash helps to prevent any accumulation of dirt, pollen, dust and airborne contaminates. It will last for up to a few year then. Links Sikkens Proluxe Cetol 1 RE Application Methods
Follow preparation procedure before applying first coat of Cetol Primary 1. Follow recommended maintenance procedures and schedule. Please click here, here, or here for further information from PPG on this change. Allow the surface to dry for at least 48 hours, or to have a moisture content of 18% or less before finishing. Low temperature, high humidity, thick films or poor ventilation will increase these times. Akzo Nobel (Manufacturer of Sikkens) sold their North American Architectural Coatings division to PPG. Please Email Customer Service Sales@thestaindepot.com, *PPG Proluxe Products Can Only Be Shipped To North America, TWP & Sikkens Stain Dealer - Alabama | Twp & Sikkens Stain Dealer - Arizona | Twp & Sikkens Stain Dealer - Arkansas |Twp & Sikkens Stain Dealer - California |Twp & Sikkens Stain Dealer - Colorado |Twp & Sikkens Stain Dealer - Connecticut | TWP & Sikkens Stain Dealer - Florida |TWP & Sikkens Stain Dealer - Georgia | Stain Dealer - Idaho |Twp & Sikkens Stain Dealer - Illinois |Twp & Sikkens Stain Dealer - Indiana Twp & Sikkens| Stain dealer - Iowa | Stain Dealer - Kansas |TWP & Sikkens Stain Dealer - Kentucky | Stain Dealer - Louisiana |Twp & Sikkens Stain Dealer - Maine | Stain Dealer - Maryland | Stain Dealer - Massachusetts |TWP & Sikkens Stain Dealer - Michigan | Stain Dealer - Minnesota | Stain Dealer - Mississippi | Stain Dealer - Missouri | Stain Dealer - Montana | Stain Dealer - Nebraska | Stain Dealer - Nevada | Stain Dealer - New Hampshire |Twp & Sikkens Stain Dealer - New Jersey |Stain Dealer - New Mexico |Twp & Sikkens Stain Dealer - New York |Twp & Sikkens Stain Dealer - North Carolina | Stain Dealer - North Dakota |TWP & Sikkens Stain Dealer - Ohio | Stain Dealer - Oklahoma | Stain Dealer - Oregon | Stain Dealer - Pennsylvania | Stain Dealer - Rhode Island Twp & Sikkens| TWP & Sikkens Stain Dealer - South Carolina | Stain Dealer - South Dakota | TWP & Sikkens Stain Dealer - Texas | Stain Dealer - Utah | Stain Dealer - Vermont | Stain Dealer - Virginia | Stain Dealer - Washington | Stain Dealer - West Virginia | Stain Dealer - Wisconsin | Stain Dealer - Wyoming |, Join Our Mailing List For Exclusive Offers, a high quality Conceal color matching caulk.
Sitemap 25
